NISSAN 2011 Murano - Manual (Page 165)

Black plate (163,1)
Model "Z51-D" EDITED: 2010/ 7/ 23
SPA2422A
Type A
SPA2450
Type B
Automatic anti-glare type
The inside mirror is designed so that it
automatically changes reflection according to
the intensity of the headlights of the following
vehicle.
The anti-glare system will be automatically
turned on when the ignition switch is pushed
to the ON position.
When the anti-glare system is turned on, the
indicator light
*
A will illuminate and excessive
glare from the headlights of the vehicle behind
you will be reduced.
Type A: Push the switch
*
B to make the
inside rearview mirror operate normally and the
indicator light will turn off. Push the
switch
again to turn the system on.
Type B: Push the “ *” switch
*
C to make the
inside rearview mirror operate normally. The
indicator light will turn off. Push the “I” switch
*
D to turn the system on.
Do not allow any object to cover the
sensors
*
E or apply glass cleaner on
them. Doing so will reduce the sensitivity
of the sensor, resulting in improper opera-
tion.
For the compass (if so equipped) operation, see
“COMPASS” in the “2. Instruments and con-
trols” section.
For the HomeLink ® Universal Transceiver opera-
tion, see “HomeLink ® UNIVERSAL TRANSCEI-
VER” in the “2. Instruments and controls”
section.
Pre-driving checks and adjustments 3-29