Subaru 2003 Legacy - Manual (Page 100)

2-10
nized with the keyless entry system’s control unit. Press either
the “LOCK/ARM” or “UNLOCK/DISARM” button six times to syn-
chronize the unit.
B
Replacing lost transmitters
If you lose a transmitter or want to purchase additional transmitters
(up to four can be programmed), you should re-program all of your
transmitters for security reasons. It is recommended that you have
your dealer program all of your transmitters into your system.
n Programming the transmitters
The keyless entry system is equipped with a special code learning
feature that allows you to program new transmitter codes into the sys-
tem or to delete old ones. The system can learn up to four unique
transmitter codes. The four transmitter codes may be the same or dif-
ferent.
To enter the programming mode:
HB1005BC HB1000CB
1
Press to dis-
arm the security
system (if so
equipped).
2
3
1. Disarm the security system. (if your vehicle is equipped with the
optional security system.)
2. Open the driver’s door and sit in the driver’s seat.
3. Close the driver’s door.