Subaru 2003 Impreza User Manual

Page 60

IMPREZA(NA) A1850BE-A (ENGLISH)

Seat, seatbelt and SRS airbags

1-35

– CONTINUED –

If the child restraint system requires a top tether,
latch the hook onto the top tether anchor and tighten
the top tether. See the “Top tether anchorages” for
additional instructions.
8. To remove the child restraint system, press the
release button on the seatbelt buckle and allow the
belt to retract completely. The belt will return to the
ELR mode.

If you have any question concerning this type of
child restraint system, ask your SUBARU dealer.

NOTE

When the child restraint system is no longer in
use, remove it and restore the ELR function of

the retractor. That function is restored by allow-
ing the seatbelt to retract fully.

WARNING

When you install a child restraint system, fol-
low the manufacturer’s instructions supplied
with it. After installing the child restraint sys-
tem, check to ensure that it is held securely in
position. If it is not held tight and secure, the
danger of your child suffering personal injury
in the event of an accident may be increased.