Subaru 2006 Baja - Manual (Page 436)

11-71
Maintenance and service
– CONTINUED –
SUBARU dealer replace the bulbs if necessary.
„ Front turn signal light, parking light
and side marker light
„
Replacing bulbs
„
Front turn signal light
„
Replacing bulbs
„
Parking light
„
Front
„
Turn signal light, parking light and side marker light The headlight assembly must be removed before the
front turn signal light and parking light bulbs can be re-
placed. When the headlight assembly has been re-
moved and then reinstalled, it may become necessary
to make a headlight aiming adjustment. After a bulb
has been replaced, it is recommended that the head-
light aiming adjustment be made at a SUBARU dealer.
1. Remove the headlight assembly mounting screws
located at the top of and the front of the headlight as-
sembly using a Phillips screwdriver or an open-end
wrench.
2. Move the headlight assembly forward.
1) Front turn signal light bulb
2) Front turn signal light bulb/parking and front side
marker light bulb
3. Remove the bulb socket from the headlight assem-
bly by turning it counterclockwise.
UBB016BA
1
2
UBB039CB