Subaru 2007 Tribeca - Manual (Page 360)

Maintenance and service
11-43
11
– CONTINUED –
T Low beam light bulbs
0
Right-hand side
1. Use a screwdriver to undo the clips on
the air intake duct, then remove the air in-
take duct. (right-hand side)
Left-hand side
2. Use a screwdriver to remove the se-
cured clip of the washer tank. To make it
easy to access the bulb, move the washer
tank to the horizontal direction. (left-hand
side)
3. Remove the bulb cover, by turning it
counterclockwise.
4. Disconnect the electrical connector.
5. Remove the retainer spring.
6. Replace the bulb, then set the retainer
B00116 B00542
B00116 B00542 B00541 B00340
B00341
A3120BE-B.book 43 ページ ２００６年５月３０日 火曜日 午前９時３２分