Subaru 2008 IMPREZA - Manual (Page 115)

The display can be switched as shown
below by pressing the trip knob.
*: “ ” or “ ” cannot be displayed when
the ignition switch is in the
“ON” posi-
tion.
For the
“ ” or “ ” indication, refer to
“Canceling the function for meter/gauge
needle movement upon turning on the
ignition switch
” in this section.
! Odometer
The odometer shows the total distance
that the vehicle has been driven.
! Double trip meter
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
To set the trip meter to zero, select the A
trip or B trip meter by pushing the knob
and keep the knob pushed for more than 2
seconds.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
If the connection between the combina-
tion meter and battery is broken for any
reason such as vehicle maintenance or
fuse replacement, the data recorded on
the trip meter will be lost.
& Tachometer
The tachometer shows the engine speed
in thousands of revolutions per minute.
CAUTION
Do not operate the engine with the
pointer of the tachometer in the red
zone. In this range, fuel injection will
be cut by the engine control module
Instruments and controls
3-7
– CONTINUED –