Subaru 2009 Impreza Navigation System - Manual (Page 236)

236 Vehicle Information
Displaying Vehicle Information and Programming Vehicle System Functions
4
Select the history frame (data storage location) in which
the data are to be retained.
5
(yes) will appear, requesting you to confirm your
selection. Select it if the selection is correct.
6
Select .
This completes the procedure.
NOTE
• A maximum of three different driving record data sets can be retained for
each of the trip meters (TRIP A and TRIP B).
• When the data storage location (history frame) specified in Step 4 is already
occupied by data, this data will be replaced with new data once you have
confirmed Step 5.
• When the driving record data has been successfully retained in a history
frame, the history frame's heading will change from a number to the date of
the data retention.
• Data retention is cancelled if you select (no) in the “Select
data (no) “box.
■
Erasing driving record data while viewing a retained
driving record data list
Use the following procedure if you want to erase retained driving
record data while viewing a driving record data list.
1
Press the button and then select .
2
Select (table) for the trip meter (TRIP A or TRIP B)
about which you wish to erase the driving record data.
3
Select (reset).