Subaru 2010 Forester - Manual (Page 264)

Black plate (255,1)
北米Model "A8150BE-B" EDITED: 2009/ 10/ 2
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Push the “SET/COAST” button and
release it. Then release the accelerator
pedal.
At this time, the “ ” indicator light on the
combination meter will illuminate.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
The cruise control can be temporarily
canceled in the following ways.
. Push the “CANCEL” button.
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
. Shift the select lever into the “N”
position (AT models only).
. Shift the shift lever into neutral position
(MT models only).
The
“ ” indicator light on the combina-
tion meter turns off when the cruise control
is canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (32
km/h) or more, push the
“RES/ACC”
button to return to the original cruising
speed automatically.
The
“ ” indicator light on the combina-
tion meter will automatically illuminate at
this time.
Starting and operating
7-35
– CONTINUED –
7