Mercedes-Benz 2013 C Class Coupe - Manual (Page 275)

Display messages Possible causes/consequences and M Solutions
Tyre press. monitor
currently unavail‐
able
Due to a source of radio interference, no signals can be received
from the wheel sensors. The tyre pressure monitor is temporarily
malfunctioning.
X Drive on.
The tyre pressure monitor restarts automatically as soon as the
cause has been rectified.
Wheel sensor(s)
missing
There is no signal from the tyre pressure sensor of one or several
wheels. The pressure of the affected tyre is not displayed in the
multifunction display.
X Have the faulty tyre pressure sensor replaced at a qualified spe-
cialist workshop.
Tyre press. moni‐
tor inoperative No
wheel sensors
The wheels fitted do not have a suitable tyre pressure sensor. The
tyre pressure monitor is deactivated.
X Fit wheels with suitable tyre pressure sensors.
The tyre pressure monitor is activated automatically after driv-
ing for a few minutes.
Tyre pressure mon‐
itor
inoperative
The tyre pressure monitor is faulty.
X Visit a qualified specialist workshop.
Vehicle (4-button multifunction steering wheel)
Display messages Possible causes/consequences and M Solutions
To start engine,
shift to P or N You have attempted to start the engine with the transmission in
position
R or D.
X Shift the transmission to position P or N.
P
Select Park (P) You have switched off the engine with the Start/Stop button and
opened the driver's door.
You wanted to lock the vehicle.
A warning tone also sounds.
or
You have switched off the engine with the Start/Stop button and
opened the driver's door with the transmission in position
N.
X Shift the transmission to position P.
Display messages
273
On-board computer and displays
Z