Memory function, Storing settings, Calling up a stored setting – Mercedes-Benz 2013 GL Class User Manual
Page 122: Function, Seats, steering wheel and mirrors
The exterior mirror on the front-passenger
side moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
if you press button : for the exterior
mirror on the driver's side
Memory function
Storing settings
G
WARNING
Only use the memory function on the driver's
side when the vehicle is stationary. You could
otherwise be distracted from the traffic
conditions by the seat moving of its own
accord, and as a result cause an accident.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
driver's side: steering wheel position
R
driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
X
X
On the driver's side, adjust the steering
wheel (
page 115) and the exterior mirrors
X
Press the
M memory button and then press
one of the storage position buttons
1, 2 or
3 within three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Calling up a stored setting
X
Press and hold the relevant storage
position button
1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
buttons.
120
Memory function
Seats, steering wheel and mirrors