TOYOTA 2010 Camry HV User Manual

Page 345

342

4-3. Do-it-yourself maintenance

■

Engine oil consumption

●

The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.

●

More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.

●

A new engine consumes more oil.

●

When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.

●

Oil consumption: Max. 1.1 qt./600 miles, 0.9 Imp. qt./600 miles (1.0 L per
1000 km)

●

If you consume more than 1.1 qt. (1.0 L, 0.9 Imp. qt.) every 600 miles
(1000 km), contact your Toyota dealer.

■

After changing the engine oil (U.S.A. only)

To reset the oil change system, follow the procedure below:

Turn off the hybrid system with the trip meter A reading shown.
(

→P. 150)

The “POWER” switch must be set in ON mode while holding down
the trip meter reset knob. A message “OIL MILEAGE RESET
MODE” will appear on the display.

Hold down the knob for at least 5 seconds. A message “COM-
PLETE” will appear and the message “OIL MILEAGE RESET
MODE” goes off.

STEP