Checking and replacing fuses – TOYOTA 2011 Tundra User Manual
Page 586
![background image](https://www.manualsdir.com/files/763895/content/doc586.png)
565
4-3. Do-it-yourself maintenance
4
Mainten
ance an
d ca
re
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have
blown. If this happens, check and replace the fuses as necessary.
Turn the engine switch off.
The fuses are located in the following places. To check the
fuses, follow the instructions below.
Engine compartment
Push the tab in and lift the lid
off.
Under the instrument panel
Remove the lid.
After a system failure, see “Fuse layout and amperage rat-
ings” (
→P. 568) for details about which fuse to check.
This manual is related to the following products: