TOYOTA 2011 Yaris Hatchback User Manual
Page 309
296
4-3. Do-it-yourself maintenance
21
AM1
25 A
Multiport fuel injection system/
sequential multiport fuel injection
system
n
After a fuse is replaced
l
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (
→P. 297)
l
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
n
If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
n
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
l
Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
l
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
l
Do not modify the fuse or the fuse box.
NOTICE
n
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
Fuse
Ampere
Circuit