TOYOTA 2011 Camry User Manual

Page 371

346

3-7. Other interior features

When the indicator light on the HomeLink

compatible trans-

ceiver starts to flash rapidly, release the buttons.
Test the operation of HomeLink

by pressing the newly pro-

grammed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink

buttons.

■

Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.

■

Reprogramming a button
The individual HomeLink

buttons cannot be erased but can be

reprogrammed. To reprogram a button, follow the “Programming”
instructions.

Operating HomeLink

Press the appropriate HomeLink

button. The HomeLink

indicator

light on the HomeLink

transceiver should turn on.

HomeLink

continues to send a signal for up to 20 seconds as long as the

button is pressed.

Erasing the entire HomeLink

memory (all three programs)

Press and hold down the 2 out-
side buttons for 20 seconds until
the indicator light flashes.

If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink

memory.

STEP