Switching off the engine, Parking brake – Mini 2003 Cooper User Manual

Page 49

OVERVIEW

REPAIRS

OPERATION

CONTROLS

DATA

INDEX

SWITCHING OFF THE ENGINE

PARKING BRAKE

You should never remove the ignition
key when the vehicle is in motion, as

the steering lock could engage.
When you leave the vehicle, always remove
the ignition key and engage the steering
lock.
When you park on downward slopes,
engage the parking brake.

Manual transmission

Turn the ignition key to position 1 or 0.

Continuously Variable automatic
Transmission (CVT)*

Engage selector lever position P, turn the
ignition key to position 1 or 0.

The parking brake is designed primarily to
prevent the vehicle from rolling when it is
parked. It operates against the rear wheels.

To engage

Lever automatically locks in position.
The warning lamp in the instrument cluster
comes on when the ignition key is in
position 2, see page

To release

1. Pull up slightly
2. Press the button
3. Push the lever downwards.

If, in exceptional circumstances, it
should be necessary to engage the

parking brake while the vehicle is in
motion, do not pull the lever with excessive
pressure. Keep your thumb pressed against
the release button while carefully pulling
the lever up to apply moderate pressure.
Excessive pressure can lead to overbraking
and loss of traction, i.e. fishtailing, at the
rear axle.
The brake lamps do not come on when the
parking brake is engaged.
Vehicles with manual transmission:
Always engage the parking brake when
parking on hills and inclined surfaces, as
first gear or reverse may not provide ade-
quate resistance to rolling.
Vehicles with CVT:
Place the selector lever in P.

ba.book Seite 47 Montag, 5. August 2002 8:09 20