Mini 2003 Cooper User Manual

Page 121

119

OVERVIEW

REPAIRS

OPERATION

CONTROLS

DATA

INDEX

FLAT TIRE – MINI MOBILITY SYSTEM

Preparing for tire repair

Before using the MINI Mobility Sys-
tem read the warning and danger

precautions on the equipment.

If possible, leave objects in which have
been forced into the tire.

Take off the tag regarding speed limits and
stick it onto the steering wheel.

Please remember that the liquid can-
ister must be replaced every four

years by your MINI Dealer if the equipment
has not been used.

The instructions for using the MINI
Mobility System are also given on the

equipment.

Pumping in liquid sealant

1. Shake the filling canister
2. Screw the filling hose onto the filling

canister

3. Unscrew the dust protection cap from

the valve of the defective tire

4. Screw out the valve core with the valve

remover. The valve remover is located in
a package with the filling hose

Place the valve core and valve
remover only on clean surfaces.

5. Remove the cap from the filling hose
6. Push the filling hose onto the tire valve
7. Hold the filling canister with the cap

down and squeeze.
Squeeze the entire contents of the canis-
ter into the tire

8. Remove filling hose
9. Screw valve core into the tire valve with

the valve remover.

In the event of a dirty valve core or of
losing it you will find another valve

core in a package with the filling hose.

ba.book Seite 119 Montag, 5. August 2002 8:09 20