Denon AVR-1910 User Manual
Page 2
17570409 A
Denon Brand Company
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi,
Kanagawa, 210-8569, Japan
www.denon.com
Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500
usa.denon.com
Denon Canada Inc.
505 Apple Creek Blvd, Unit 5, Markham, Ontario, Canada L3R 5B1
TEL: 905-475-4085
ca.denon.com
*Design and specifi cations are subject to change without notice.
*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
*DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and
DTS-HD Master Audio are trademarks of DTS, Inc.
*HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
*Audyssey MultEQ
®
is a registered trademark of Audyssey Laboratories.
Audyssey Dynamic EQ
™
is a trademark of Audyssey Laboratories.
Audyssey Dynamic Volume™ is a trademark of Audyssey Laboratories.
*iPod
®
is a trademark of Apple Inc., registered in the U.S. and other countries.
Main Specifi cations
Power amplifi er section
Preamplifi er section
Rated output
*THD fi gures are power amp stage values.
Input sensitivity/impedance 200 mV / 47 kΩ/kohms
Front L/R
90 W + 90 W
Frequency response
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
S/N Ratio
100 dB (IHF-A weighted, DIRECT mode)
125 W + 125 W
(6 ohms, 1 kHz, THD 0.7%)
FM section
Center
90 W
Tuning frequency range
87.5 - 107.9 MHz
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
Usable sensitivity
1.0 μV (11.2 dBf)
125 W
(6 ohms, 1 kHz, THD 0.7%)
AM section
Surround L/R
90 W + 90 W
Tuning frequency range
520 - 1710 kHz
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
Usable sensitivity
18 μV
125 W + 125 W
(6 ohms, 1 kHz, THD 0.7%)
General
Surround Back L/R
90 W + 90 W
Power supply
AC 120 V, 60 Hz
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %)
Power consumption
5.5 A (Standby 0.3 W)
125 W + 125 W
Dimensions (W x H x D)
434 x 171 x 377 mm
(6 ohms, 1 kHz, THD 0.7%)
17-3/32” x 6-47/64” x 14-27/32”
Weight 10.7
kg
23 lbs 9.5 oz
Ports
In
HDMI
x 4
Component
x 2
S-Video
x 1
Composite (Video)
x 4
Analog Audio (Tuner included)
x 7
Analog EXT. Input
7.1ch
Digital Optical
x 2
Digital Coaxial
x 2
Out
HDMI Monitor
x 1
Component Monitor
x 1
Composite Monitor (Monitor / DVR)
x 2
Analog Audio REC
x 2
Analog Audio (Zone2)
x 1
Audio Preout (SW)
x 1
Digital Optical
x 1
Phones
x 1
Other
Microphone Port
x 1
Dock Control Port
x 1
FM Tuner Antenna
x 1
AM Tuner Antenna
x 1
Sirius Connector
x 1
Remote Control In/Out
In 1 / Out 1
State-of-the-art Denon Solutions for
Maximizing Content Quality
• Robust power source for each block, for stable supply of current
To produce a clear, stable power circuit that prevents unwanted
noise from aff ecting the sound, the AVR-1910 has a dedicated
CPU transformer that is separate from the audio and video
circuitry. The AVR-1910 is equipped with a powerful rectifier
circuit with 12,000 μF block capacitors and a bridge diode of 8A
capacity, surpassing typical models in this price range, to supply
stable current with negligible noise.
• High-bit I/P Converter and Scaler up to 1080p
The AVR-1910 uses a high-performance video up-scaler to convert
SD (standard definition) video material to HD (high definition)
quality. This means that the 480i/480p (SD-quality) video signals
of DVD programs and other material are converted to the high-
quality 1080p signal of HD video, and output to the HDMI port.
The fuzziness in the details of SD video is removed to produce
a clear picture. Now you can enjoy not only your DVDs but also
your VCR tapes and games with much greater clarity and detail.
• Analog to HDMI up - conversion, I/P conver ter
and scaler on HDMI to HDMI
Analog video input signals (composite, S-video, component) are
converted to digital video signals and transmitted to the HDMI
output port. Digital video signals are sent to HDMI output even
when multiple HDMI devices such as a video camera or a game
console are connected to the AVR-1910. One HDMI cable is all
that’s needed to connect the AVR-1910 to a TV (monitor).
• Dolby Pro Logic IIz processing
Dolby Pro Logic IIz introduces a new dimension to home theater
entertainment through the addition of a pair of front height
channels. Compatible with stereo, 5.1 and 7.1 content, Dolby
Pro Logic IIz provides enhanced spaciousness, depth and
dimension to movies, concert video and video game playback
while maintaining the full integrity of the source mix.
• Minimum Signal Path for clear audio and video signal
The “simple and straight” design concept has been thoroughly
implemented in the signal paths to contribute to immaculately
clean audio and video playback.
Signal paths are as short as
possible to keep signal degradation in the audio and video
circuitry to an absolute minimum.
• Direct Mechanical Ground Construction, embodying
concepts for thorough vibration resistance
Vibration-resistant construction has been reviewed to thoroughly
suppress the adverse influences of vibration on sound quality.
The power transformers, a source of vibration, have been
securely mounted on the highly rigid bottom chassis.
Direct
mounting of cast-iron feet to the radiator in near proximity to
each other serves to suppress mutual vibration with the power
transformers and other sources of vibration.
• Digital / analog separate windings
• Compressed Audio Restorer to enhance
digital music fi les
Connectivity & Future-ready Expandability
• Power Amp Assign function, for versatility in
using the AVR-1910 for diff erent purposes
The AVR-1910 supports up to 7.1 channels (FL/ FR/ C/ SL/
SR/ SBL/ SBR/ SW) for surround playback defined by the
Blu-ray disc format. To enjoy surround playback with the
AVR-1910’s Dolby Pro Logic IIz, you can reassign the power
amp from the two surround back channels (SBL/SBR) to the
two front high channels (FLH/FRH). Or by assigning the SBL/
SBR power amp to Zone 2, you can enjoy multi-room audio
playback, or to achieve higher-quality sound for 2-channel
stereo playback, you can configure the AVR-1910 for front
bi-amp operation. These are just some of the ways you can
arrange the AVR-1910’s amps to suit various listening styles.
• Audio/video playback and control for iPod with
optional dock (ASD-11R)
Ease-of-use
• Audyssey Dynamic Volume,
for real-time volume adjustment
Audyssey Dynamic Volume constantly monitors the sound
sources and adjusts the volume to the optimum level for the
particular source being heard without sacrificing dynamic
range. The AVR-1910 is also equipped with Audyssey MultEQ
which measures the acoustic characteristics of the room to
obtain the optimum acoustic effects, and Dynamic EQ which
reproduces the high and low range with the optimum acoustic
effect during low volume levels. Dynamic Volume combines
these two functions to achieve maximum performance.
• MultEQ Auto setup and Room EQ room acoustic
correction system
-Tower type microphone for more accurate measuring
-Up to six measurement points
-High level resolution fi lters for satellite speakers and also subwoofer
• Auto surround mode
• Audio Delay function
(max. 6 frames or 200 mSec)
• Muting level settings (Full/-40dB/-20dB)
• Audio level memory, capable of correcting dif-
ferent signal levels for each input device
• Variable subwoofer crossover switching