Lenco TFT-726 - Manual (Page 14)

Technical Specifications
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 [email protected]
Output Format PAL/NTSC
Output Port CVBS
Audio Decoder Format MPEG-1 (layer1&2&3)
Audio output Stereo
Power Voltage DC 9V (1.0A)
Working Power 10W
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level -25~-82dBm
IF Bandwidth 7MHz and 8MHz
Modulation QPSK,16QAM,64QAM
Identification of Controls Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany 0900-1520530 (Local charges)
The Netherlands 0900-23553626 (Local charges + 1ct p/min)
Belgium 02-6200115 (Local charges)
France 03-81484280 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model
and serial number of your product. The serial number can be found
on the back of the device. Please write down the serial number
below:
Model: TFT-726
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law,
which means that in case of repairs (both during and after the
warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs
to Lenco directly.
Important note: If this unit is opened or accessed by a non-official
service center in any way, the warranty expires.
This device is not suitable for professional use. In case of
professional use, all warranty obligations of the manufacturer will
be voided.
13