Lenco TAB-702 - Manual (Page 6)

6
End of life
In case of disposal of the unit note that all batteries and accumulators need to be
removed from this product first.
We recommend to bring the unit back to the purchasing address. They will remove
the battery and recycle the unit free of charge.
If you want to remove the batteries or accumulators yourself, use the following
instructions to remove them:
1. Open the unit by using a flat screwdriver.
2. Cut the power wires of the battery, first the black wire, second the red wire.
3. Place a flat screwdriver under the battery, wipe it up and cut all remaining wires.
Batteries need to be disposed according to the “Waste Electrical and Electronic
Equipment Directive”.