Connecting to a computer, Troubleshooting – Lenco TAB-702 User Manual

Page 13

Text mode
Original mode

Connecting to a Computer

Connect the tablet to a computer to transfer files.
1. Connect the tablet to a computer via the USB cable.
2. When your tablet is connected, a USB logo will appear.

3. Mount the storage drive.
Touch turn on USB storage to mount the tablet’s built-in storage, and then touch
Mount to confirm. When mounted, you can copy files to/from your computer to it.

Troubleshooting

Reset this device

In the event that the device freezes, you can force the device to shut down by
holding the

Power button for 15 seconds.

If the

Power button does not reset your device, use the “pinhole reset” button.