Lenco SCR-97 USB - Manual (Page 5)

GB 3
6. Press the PLAY/PAUSE button.
Track number "01" & the symbol " " & "CD"
will be shown during normal compact disc playback.
Track number "001", the symbol " " & "MP3"
will be shown during MP3 playback.
Track number "001", the symbol " " & "WMA "
will be shown during WMA playback.
Track number "001", the symbol " " & "USB"
will be shown during USB playback.
COMPACT DISC PLAYBACK
2 . Set to CD
3 . Open the disc holder by pushing the CD door
open button.
4. Insert a disc with the label side facing up.
5 . Close the disc holder.
The disc will rotate and
the total tracks of the disc
will show on the display.
FUNCTION
CD/USB
MP3 display
CD display
USB display
WMA display
1 . Turn on the unit by
pressing the
POWER button.
POWER
MP3 display
CD display
USB display
WMA display
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
be flashed. Press the button again to resume playback.
TO STOP PLAYBACK
Press the STOP / CD/USB button and the display
shows the total tracks of the disc.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback,
and release the button as soon as you recognise the
desired passage. Then normal CD playback will resume from this point.
CD display
PLAY/PAUSE
REPEAT , REPEAT FOLDER , REPEAT ALL AND MIX PLAYBACK
Press PLAY MODE button during CD playback.
CD plays with a single track repeat,
all tracks repeat or randomly.
PLAY MODE
Unit will be automatically off after 30mins without any operation (in stop mode / CD door open).