Lenco SCD-50BT - Manual (Page 7)

EN-6
SPECIFICATION
Power requirement ............. AC power adapter:
Input: AC 100-240V, 50/60Hz
Output: DC 9V, 1.5A
DC 12V UM-2/"C" x 8pcs (batteries) – not included
Power consumption ............ 13W
Dimensions ........................ Approx. 440(L) X 254(W) X 144(H) mm
Operation temperature........ +5°C ~ + 35°C
Receiving band .................. FM
Tuning range ...................... FM 87.5 - 108 MHz
Playback system ................ Compact Disc Digital Audio System
Output power ..................... 2.4W x 2 @10% THD
Speaker impedance ............ 4Ω / 5W
Bluetooth compatible .......... Support A2DP
Compatible with .................. USB, SD card
Power supply adapter
Use only the power supply listed in the user instructions.
Manufacturer: NG-L
Model number: APX915A
Specifications are subject to change without notice.
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany 0900-1520530 (Local charges)
The Netherlands 0900-23553626 (Local charges + 1ct p/min)
Belgium 02-6200115 (Local charges)
France 03-81484280 (Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial number of your
product. The serial number can be found on the back of the device. Please write down the
serial number below:
Model: SCD-50 BT
Serial number:_________________________________
Lenco offers service and warranty in accordance to European law, which means that in
case of repairs (both during and after the warranty period) you should contact your local
dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.