Lenco SCD-37 USB - Manual (Page 5)

GB 3
COMPACT DISC PLAYBACK
1 . Set to CD
2 . Open the CD door by pushing
Open / Close CD button.
3. Insert a disc with the label
side facing up.
4 . Close the CD door.
The disc will rotate and
the total tracks of the disc
will show on the display.
CD
FUNCTION
5. Press the PLAY/PAUSE button.
Track number "01" & the symbol " " & "DISC"
will be shown during normal compact disc playback.
Track number "001", the symbol " " & "DISC &
MP3" will be shown during MP3 playback.
Track number "001", the symbol " " & "DISC &
WMA" will be shown during WMA playback.
Track number "001", the symbol " " & "USB"
will be shown during USB playback.
CD display
MP3 display WMA display USB display
TO INTERRUPT PLAYBACK
Press the Play/Pause button and the symbol " " will
be flashed. Press the button again to resume playback.
CD display MP3 display WMA display
USB display
TO STOP PLAYBACK
Press the STOP /CD/USB button and the display shows
the total tracks of the disc.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the PREV NEXT buttons according to the desired skip direction.
• Play/back resumes from the selected track.
• When the PREV button is pressed once during play, the previous track
starts again.
• When the NEXT button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the PREV or NEXT button pressed during playback,
and release the button as soon as you recognise the desired
Unit will be automatically off within 15 mins without further operation (in stop mode / CD door open).
After auto off, slide the FUNCTION selector to OFF position and then slide to RADIO / CD position for listening.
REPEAT , REPEAT FOLDER AND REPEAT ALL PLAYBACK
Press REPEAT button during CD playback. CD plays with a single track repeat,
all tracks repeat.