Lenco SCD-37 USB - Manual (Page 4)

NOTE :
FM stereo LED indicator lights
if receive FM stereo broadcast .
AFTER LISTENING
Set the FUNCTION selector to OFF.
POWER SUPPLY
USING HOUSE CURRENT
Before use, check that the rated voltage of your unit
matches your local voltage.
Note: Plug is used as the disconnect device.
The disconnect device shall remain readily
operable.
USING BATTERIES
Disconnect the AC power cord from
the AC inlet of the unit.
Battery power is cut
automatically by the cord
while it is connected.
Insert six UM-2
( size C ) batteries.
battery door
When the volume decrease,
or the sound distorts,
replace all of the batteries
with new ones.
To AC socket To AC outlet
AUX IN
FUNCTION
AUX. IN
AUX. IN
An external (auxiliary) audio source (i.e., personal CD player
or MP3 player) can be connected to this unit and heard through
the speakers.
1) Plug one end of cable into the AUX IN socket on the unit.
2) Plug the other end of the cable into the Headphone or
Line Out socket of the external source.
3) Set function switch on the unit to AUX IN.
Continue to operate CD or MP3 player as usual. Selections will be heard through the unit's speakers.
(Plug other end into external
source such as an MP3 player.)
ADJUSTING THE SOUND
TO ADJUST THE VOLUME
VOLUME
MAX. MIN.
LISTENING TO THE RADIO
1 . Set to FM 2 . Tune in to a station.
TUNING
GB 2
Unit will be automatically off after 15 mins without further operation.
After auto off, slide the FUNCTION selector to OFF position and then slide to AUX IN position for listening.
FUNCTION
FM
3 . Adjust the sound.
FOR BETTER RECEPTION
FM
VOLUME
MAX. MIN.