Lenco SCD-11 - Manual (Page 8)

- Press the ID3 button on the remote to enter ID3 setting mode and select " ID3 ON " or " ID3 OFF " Press the ID3 button on the remote to enter ID3 setting mode and select " ID3 ON " or " ID3 OFF "
- Song name,Singer name and album name can be displayed cyclically
during playing MP3.
- Title-song name Artist-singer name Album-Album name
FOL��E� �ELE�TION
1. In STOP mode, press the BAND / FOLDER button to skip to the next folder.
2. This operation is valid for MP3 / WMA / USB media that has been placed into a
folder.
AUX. IN
An external (auxiliary) audio source (i.e., personal CD player
or MP3 player) can be connected to this unit and heard
through the speakers.
1) Plug one end of the cable (not included) into the AUX IN
socket on the unit.
2) Plug the other end of the cable into the Headphone or
Line Out socket of the external source.
3) Press the FUNCTION button repeatedly until “AUX ”
is shown on the display.
Continue to operate the CD or MP3 player as usual. Selections will be heard through the unit's speakers.
AUX IN
kHz
MHz
U�B
�NOOZE
�A���
ALLB FOL��E� INT�O �AN�� ��OG
EQ ����
�TE�EO MEMO�Y
BA�� M�3 WMA
�LEE� TIME�
���
1. If you want to fall asleep to music, press and hold
the SNOOZE / SLEEP button when the unit is on.
2. You may adjust the radio or CD player's sleep function to play from 10, 20,
30 up to 90 minutes of music before shutting itself off automatically.
00 = sleep timer off
TO �ET �LEE� FUN�TION
10 20 30 40 50 60 70 80 90 00
GB 6
��u��ng �h� s���p m����
1. Pressing the SNOOZE / SLEEP button on the remote will turn off the system for 9 minutes. on the remote will turn off the system for 9 minutes.
2. Pls note that the SNOOZE / SLEEP button will only be functional during TIMER mode. / SLEEP button will only be functional during TIMER mode. button will only be functional during TIMER mode. button will only be functional during TIMER mode. will only be functional during TIMER mode.
�NOOZE
FUNCTION
BAND / FOLDER
ID3
TIME�
I�� 3 ��I��LAY
1. Press the STANDBY button to go into standby mode.
2. Press and hold the "TIMER/EQ" button, "TIMER"/ the hour digits will flash.
Press the skip buttons to set the hour.
Press the "TIMER/EQ" button to confirm, the minutes digits will flash and press
the skip buttons to set the minutes. Press the "TIMER/EQ" button to confirm .
3. Timer wake up can be selected as UDISK / CD / TUNER / SD / MMC by futhur pressing
and press the " TIMER/EQ " button to confirm.
4. Wake up volume can be selected by pressing the VOLUME +/- button and press the " TIMER/EQ"
button to confirm.
5. To enable the TIMER function, press the TIMER/EQ button at standby mode and the unit
will turn on at the selected preset times.
TIMER / EQ
(Plug the other end into the external
source such as an MP3 player.)
SLEEP
SCD-11 NO IPOD LENCO ENGLISH rev8 8 4/12/2009 10:24:26