Lenco Playconnect User Manual

Page 6

EN -

- EN

LENCO PLAYCONNECT INstruction MANUAL

f. After Selection you can choose to play immediately (Now), after the song currently

playing (Next) or at the end of the list (Last). Press cancel ignores the selection.
g. Use the button up/right as toggle function between the play list and the playing song.
h. Use the controls as per described below.
I<< : last song
>>I : Next song
II/> : Pause/Play
: Display volume setting ON/OFF
Upper bar : Time display and selection
Lower bar : Volume setting (Also can be addressed by the volume keys of your mobile

device)

4.2. Multi-control :

If you have several mobile devices connected to your home network running the Lenco

PLAYLINK App, you can build a common play list from your different mobile devices.

ANDROID

IOS

ANDROID

IOS

4.3. Multi zones:

If several audio devices (speakers, audio adapters) are connected simultaneously on your

home WiFi network, you can play indifferently a song on speaker 1 and another song on

the speaker 2 from any mobile device connected to the network.

5. Multi-room operation( Party mode, or stereo)

Multi-room need two or more speakers (up to 10 if your network can support 300 Mbps

speed), the recommended operation being 2 to 4.

Note: 1. All speakers and audio adapters must be connected on the same WiFi network.

2. The speed of the network is very important to benefit of the Multi-room function. If more

than two audio devices are connected, the usage of a 5GHz multimedia router is

recommended. From 4 audio devices connected, this is highly recommended.
3. To play High Resolution songs (HR), you imperatively need to use a multimedia router

and connect all audio devices and your mobile device in 5 GHz band. The Number of

speakers and audio adapters which can be used in HR depends from the performances

of your network. It's recommended to not group more than 2 audio devices.
a. Press the devices banner on the top of the screen to display the devices list:
b. Press the “group button", and select the audio devices you want to group. Then

press the button "Done”.

ANDROID

IOS

ANDROID

IOS

ANDROID

IOS