Lenco MPBlaster Pink Panther - Manual (Page 3)

music from it and the speaker sound will cut automatically.
3. To turn OFF the Player, press and hold button.
To Adjust Volume Levels
4. Pressing “+ / S” button to increase volume levels.
5. Pressing “-“ button to decrease volume levels.
To Play / Pause Music
6. In music playing mode, press
button to pause playing music
7. Press again to continue the play.
To Changing Music
8. Press
button to change to next song, press it again will change again.
9. Press button to change to previous song, press it again will change again.
To Change Normal / Shuffle Play
10. Press and hold “+ / S” button for 2 - 3 seconds to enter “Random” play mode and the
LED light will flashing slow about once per 2 seconds.
11. Press and hold “+ / S” button for 2 – 3 seconds again to return to “Normal” play mode
and the LED light will flashing about once per 1 seconds.
F. Use External Memory Card
This player allows you to play those support media files from your memory card
(T-Flash). Also it will increase the mobile hard disk memory capacity of the player if you use
this option.
1. Turn OFF the player and then insert your T-Flash memory card into player’s memory
card slot; make sure memory card is firmly and correctly inserted.
2. Now you can turn ON the player by press button, the player is reading and
searching the supported music files from memory card / internal memory, and found
music will play automatically.
3. Player will give priority to external memory card, read and play the music files, when it
has been inserted into memory card slot, and then play the built-in memory.
4. Before you want to take out / insert the memory card with player. Please turn OFF the
player.
G. To Reset Player
In some circumstances the device may hanging and need to reset. This player has
design with built-in a mini tact switch which located at the behind of the earphone jack, so it
can provide the reset function to restart the device pass through the earphone jack hole.
To Reset
1. Use a 2mm stick or similar object (like tooth stick), and carefully insert the stick, use
dull side, into the earphone jack hole until you feel to hit the end. Actually that is the
tact switch button surface.
2. Then add a bit of force and you will get a click sound and feeling return from switch.
The device is reset, all settings are back to factory default and the device will go into
play mode automatically.
Important: Do not reset the device if it is proper working.