Lenco MPBlaster Pink Panther - Manual (Page 2)

C. Connecting and Disconnecting Player
You can connect the player to your computer to upload / download those music files,
and charging the battery, disconnect them when you’re done.
To Connecting Player:
1. Plug the USB connector of Player into a USB port on your computer, then the computer
will detecting and installing driver automatically. And removable disk drive(s) will
display in “My computer” folder (for Windows 2000 / XP system or above). Or,
2. An “Untitled” icon will display on desktop indicating the player is removable disk(s). (for
MAC 9.2 system or above)
3. Now the player is ready for music files upload / download with your computer.
4. You can transfer the music files by using the computer mouse and drag and place, or
copy and paste, in between the player and computer.
To Disconnecting Player:
It’s important not to disconnect player while it’s syncing. Don’t disconnect, if you have
uploading or downloading music files with your computer.
5. To eject the connection, press and hold the
button for 2 – 3 seconds, then you will
see the relevant removable driver is removed and default sound for hardware remove
is hear from you computer. Or,
6. If you’re using a Windows system PC, you can disconnect the player in My Computer
or by clicking the “Safely Remove Hardware” icon in the Windows system tray, select
the correspondence name of USB Device and choose Stop > Confirm > Confirm follow
by the pop up windows from computer.
7. If you’re using a Mac, you can also disconnect player by dragging the player icon on
the desktop to the Trash.
8. And, now is safe to disconnect the player with your computer, unplug the player from
your computer.
9. If you’re accidentally disconnect player without disconnect it, reconnect it to your
computer and sync again. (Some media file will be loss if this circumstance happen)
D. LED Indicator Light
1. In Power OFF Mode: No light.
2. In Music Playing Mode: Light flashing (about once per second )
3. In Music Pause Mode: Light bright.
4. In PC connection / Charging Mode: Light bright
5. Charging Complete: Light Off
E. Getting Start Player
The player has a power speaker design, it gives you without any wires where listen to
music, so you can easily enjoy the music.
Turn Player ON / OFF and Playing Music:
1. Press and hold
button to turn ON the Player, the status LED indicator will light and
then flashing, the player is playing music and music sounds from power speaker.
2. Plug the stereo earphone plug into the earphone output jack, if you want to listening