Lenco MDV-24 - Manual (Page 7)

-6-
CONNECTION WITH TV
1. If your TV-set has AV terminal, connect this unit to TV-set with A/V cables, and set TV-set to be
AV status after confirming the connection is correct. (Figure 1)
2. If your TV-set has S-Video terminal, please use the S-Video connection cable to connect the
player and TV-set, to obtain a higher quality image. (Figure 2)
3. If your TV-set has chromatics output terminal, please use three connection cables to connect
the player and TV-set, to obtain a more vivid image. (Figure 3)
4. This unit has an output interface for SCART output, which can directly be connected with TV-set.
(Figure 4)
Note:
1. Please turn off the both player and TV before they are connected to the power line from the
socket.
2. You may adjust the corresponding system according to your TV system while watching various
discs.
3. If there are multiple connections between video player and TV, please select one and unplug
others so as not to affect the quality of images and sound.
4. Do not switch on /off or press power switch frequently, switching on and off each time must have
an interval of 3 seconds.
5. Do not connect the digital optical or coaxial output jack of this player with the analogue signal
input terminal for reception.