Lenco MDV-24 - Manual (Page 14)

-13-
BASIC OPERATION
SHORTCUT
When play DVD discs, press the Shortcut button to jump over the initial title, menu or warnings.
(Only for some discs, subject to the quality or recorded status of the played discs)
NUMERIC KEYS
1). While playing songs, press the Numeric Keys buttons to directly select the songs you
need.
2). If the desired track number is # 10 or above, you can select it by pressing the 10+ button once, and
then pressing a Digital button (1--10). For example: If the 16th song is needed, you can press the 10+
button followed by the 6 button.
PROGRAM
● In play VCD/CD disc, ●In play DVD disc, press Program
press Program button, the TV button, the TV screen shows:
Screen shows:
1. If the player is in the PBC ON status, and the programmed songs are being play, this operation will
result in PBC turning off.
2. Input the number that you want at the place of the cursor; move the cursor to START; press the
Play/Enter button, the songs will play in the specified order.
3. While programming, press the Clear button to eliminate the digitals that you input.
4. To cancel programmed play: press the Program button again, the cursor will move to EXIT
automatically, press Play/Enter again to cancel programmed play.
MP3 DISC PLAYING FUNCTION
1). Press the EJECT button on remote control (or Open/Close button on front panel) to
open the deck, put in an MP3 disc, then press the Eject or Open/Close button to close the
deck. This unit begins to read it, and the TV screen will display the following figure,