Lenco MC-148 DAB+ - Manual (Page 18)

17
Speaker Size 130 x 186.5 x 125 mm
Net Weight 3.0kg(Approximate)
TROUBLESHOOTING
In the unlikely event of difficulties with your appliance please follow the
trouble shooting guide below.
Problem Reason(s) Solution(s)
No Power Power cable not
connected to wall
socket. Power socket is
not switched on. Make sure the plug is
connected.
Switch the power on.
No Sound
CD/AUX/RADIO.
No Sound from
AUX input. Volume is too low. AUX
source volume is too
low. Increase the volume.
Increase the output volume
of the AUX source.
Sound is distorted.
Sound is distorted
from AUX input. Volume is too high. AUX
source volume is too
high. Reduce the volume. Reduce
the output volume of the
AUX source.
Unable to Play No disc in the tray.
Disc not loaded
properly.
Disc is dirty. Insert a compatible disc.
Check the disc loaded.
Clean the disc.
Static Sound Poor reception Re-locate the antenna (FM).
Desired station not
found. Weak signal
Station not available in
your area. Use the manual tune
function.
See DAB+ availability
website:
http://www.getdigital
radio.com/
Weak or no DAB +
signal DAB+ not available in
your area.
I can hear a
burbling noise on
some stations. Weak signal. Try re-positioning the aeria
(earphones).
Unit switches off
after 20 minutes of
inactivity. Auto standby mode in
operation. This unit is designed to
enter STANDBY mode
automatically after 20