Lenco LED-2213 - Manual (Page 11)

PC connection
As PCs are sometimes still supplied with a ‘conventional’ CRT monitor, you may need to
adjust the display settings of your PCs graphics card, otherwise the pictures may not appear
correctly. Switch on your PC (still with your original monitor connected) no w select
the screen resolution, and select 60Hz refresh rate. Switch off your PC, then connec t it to
your TV while both appliances are still switched off.
VGA, HDMI PC Connection
Use a PC-VGA cable (not supplied) to connect the TV to your PC. You can also use an
HDMI cable to connect to your PC (if your PC Graphic card supports HDMI). When the HDMI
cable is used, the PC audio cable is no longer required. If you use the HDMI to DVI cable,
you will need to use the PC audio cable. Connect all cables carefully and do not bend or
break the connector pins.
When using the VGA cable
x Switch on the TV
x Switch on the PC
x Select PC/VGA as input source
When using the HDMI cable
x Select HDMI as input source
VGA cable
Audio cable
HDMI to DVI cable
HDMI to HDMI
( All illustrated cables are not supplied)
Connecting external devices (continued)
9