Lenco L-83 - Manual (Page 6)

6
D.
Clip the E ring on the shaft and place the rubber mat onto the turntable
platter.
Caution:
1.
Make sure that the drive belt is not twisted or distorted.
2.
Avoid oil. Oil splashes will make the belt slippery.
Auto Return Reset:
Always do the reset for Auto Return once you move this product. The
mechanism of Auto Return will rotate irregularly when moving and it will
cause the malfunction of Auto Return. The following steps will reset the
mechanism to normal.
1.
Place a record on the platter and play it.
2.
Manually lever the tone arm and place it to the blank part of the end of
the record.
3.
The mechanism of Auto Return function will be adjusted properly and
the tone arm will automatically return to the arm rest.
Clip the E ring on the shaft and place the rubber mat onto the turntable
Always do the reset for Auto Return once you move this product. The
mechanism of Auto Return will rotate irregularly when moving and it will
The following steps will reset the
Manually lever the tone arm and place it to the blank part of the end of
The mechanism of Auto Return function will be adjusted properly and