Lenco L-85 User Manual
Page 4
4
Keep the device away from heat sources such as radiators, heaters,
stoves, candles and other heat-generating products.
Avoid using the device near strong magnetic fields.
ESD can disturb normal usage of this device. If so, simply reset and
restart the device following the instruction manual. During file
transmission, please handle with care and operate in a static-free
environment.
Safety instructions - continued
WARNING! NEVER INSERT AN OBJECT INTO THE PRODUCT
THROUGH THE VENTS OR OPENINGS. HIGH VOLTAGE FLOWS
THRU THE PRODUCT AND INSERTING AN OBJECT CAN CAUSE
ELECTRIC SHOCK AND/OR SHORT CIRCUIT INTERNAL PARTS.
FOR THE SAME REASON, DO NOT SPILL WATER OR LIQUID ON
THE PRODUCT.
Do NOT use in wet or moist areas such as bathrooms, steamy
kitchens or near swimming pools.
Do not use this device when condensation may occur.
This tablet is produced according to all current safety regulations. The
following safety tips should safeguard users against careless use and
dangers involved with such use.
Although this device is manufactured with the utmost care and
checked several times before leaving the factory, it is still possible that
problems may occur, as with all electrical appliances. If you notice
smoke, an excessive build-up of heat or any other unexpected
phenomena, you should disconnect the plug from the main power
socket immediately.
This device must be well ventilated at all time!
This device must operate on a power source as specified on the
specification label. If you are not sure of the type of power supply used
in your home, consult your dealer or local power company.
The socket outlet must be installed near the equipment and must be
easily accessible.
Do not overload AC outlets or extension cords. Overloading can cause
fire or electric shock.
Devices with Class 1 construction should be connected to a main
socket outlet with a protective earthed connection.
Devices with Class 2 construction do not require a earthed connection.
Keep away from rodents. Rodents enjoy biting on power cords.
Always hold the plug when pulling it out of the main supply socket. Do
not pull the power cord. This can cause a short circuit.
Avoid placing the device on any surfaces that may be subject to
vibrations or shocks.