Lenco Kidztab-520 mini - Manual (Page 5)

5
an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from
the main power socket immediately.
 This device must be well ventilated at all time!
 This device must operate on a power source as specified on the specification label. If you are not sure of
the type of power supply used in your home, consult your dealer or local power company.
 The socket outlet must be installed near the equipment and must be easily accessible.
 Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
 Devices with Class 1 construction should be connected to a main socket outlet with a protective earthed
connection.
 Devices with Class 2 construction do not require a earthed connection.
 Keep away from rodents. Rodents enjoy biting on power cords.
 Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can
cause a short circuit.
 The screen is made of plastic and can break when damaged. When broken, be careful with sharp edged
plastic splinters to avoid injury.
 Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
 When the device is not in use for long periods, unplug the AC power cable for safety reasons.
 Do NOT knock on, press, hit or shake the screen as you may damage the internal circuits.
 To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To remove severe
stains, you may use a damp cloth with dilute detergent.
 The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of
the device or battery replacement.
 If the device will not be used for an extended period, please charge the battery at least once per month to
maintain battery life.