Lenco iPOD TOWER 1 User Manual

Page 4

PANELS

6 7

1. FAST REWIND/FAST FORWARD

BUTTONS

2. AUDIO INPUT BUTTON

3. SLEEP BUTTON

4. IPOD INTERFACE

5. STANDBY BUTTON

6. PLAY/PAUSE BUTTON

7. STOP BUTTON

8. PREVIOUS/NEXT BUTTONS

9. VOLUME -/+ BUTTONS

10. DISPLAY SCREEN

11. USB PORT

12. MULTI-MEDIA CARD PORT

13. POWER SUPPLY INPUT

14. POWER ON/OFF

BASIC OPERATION

USB/DIGITAL CARD

Note:
1) USB-Extension cable should have a max. length of 0.5m.
2) Depending on the amount of data and media speed, it may take longer for system

to read the contents of media device. In some cases, reading time may be as long
as 60 seconds. This is not a malfunction.

3) Even when they are in a supported format, some files may not play depending on

the content.

It is possible to listen to audio files using the USB or CARD interface of this unit.

1. Connect the USB device or CARD with this unit.
2. Press the

button on the remote control to play the USB or CARD. Press

button again to switch between USB and CARD modes.

3. Press the

button to fast rewind or fast forward; Press the

button to go to the previous or next audio files.

4. To exit the USB/CARD mode: Press the

button, and switch

to other modes.

USB/SD

IPOD AUDIO

iPhone information

When you connect your iPhone with this unit, the iPhone screen will show t a prompt
information:
``Would your like to turn on Airplane Mode to reduce audio interference? You will
not be able to make of receive calls.``
Then you can choose ``Yes``, or ``No`` for this unit.

If you choose ``Yes``, everything works ok but you cannot be called because your are
in airplane mode.
If you choose ``No``, also everything is ok and you can be called.
Only when they call you, you need to disconnect the iPhone. Also you hear every few
minutes a annoying sound for a few seconds (the sound when you hold a phone next
to a speaker).