Lenco DVT-229 - Manual (Page 13)

12
6. Press “c/d” button to select “Auto Sleep” and press the “e/f” button to select the function
“On” or “Off”.
7. Press “c/d” button to select “Time Zone” and press the “e/f” button to select the local time
zone.
OPTION
1. Press the “MENU” button to enter the OSD
menu. Then press “e/f” button to select the
“OPTION” menu. Enter the “OPTION” menu
by pressing “d” button or “ENTER” button.
2. Press “c/d” button to select “Language” and
press the “e/f” button to select the OSD
language which you desire.
3. Press “c/d” button to select “Audio
Language” and press the “f” button or
“ENTER” button to set the “Audio Language”.
This function is only used for DTV source.
4. Press “c/d” button to select “Subtitle Language” and press the “f” button or “ENTER”
button to set the “Subtitle Language”. This function is only used for DTV source.
5. Press “c/d” button to select “Hearing Impaired” and press the “e/f” button to select “On”
or “Off”. This function is only used for DTV source .
6. Press “c/d” button to select “ Country ”. The
Country is set to default state., setting is can not
be changed.
7. Press “c/d” button to select “Restore Setting”
menu and press the “f” button or “ENTER”
button to enter. Press the “e/f” button to
select “YES” or “NO”, press “ENTER” button
to reset when select “YES”, press “ENTER”
button to return back to the previous menu
when select “NO”.
LOCK
1. Press the “MENU” button to enter the OSD menu.
Then press “e/f” button to select the “LOCK”
menu. Enter the “LOCK” menu by pressing “d”
button. The default password is “0000”. The
administrator password is “8899”.
2. Press “c/d” button to select “Lock Channel” and
press the “e/f” button to select “On” or