Lenco DVP-735 - Manual (Page 12)

12
6. Troubleshooting
If your DVD player does not seem to function properly, check the below items before you contact
your dealer.
Symptom Check
Make sure the AC adaptor is securely plugged into an AC outlet
Make sure the battery is charged
Power does not
turn on or
suddenly turns
off. Turn the power off and then back on
Check if the disc format is supported
Check if the disc is not damaged
Check that the disc is inserted with the label-side up
No picture or
sound
Check if the lens is clean
No picture Check if the LCD is turned on
Check that the display is opened. if it is closed the speakers will be disabled
No sound
Check the volume level
7. Specifications
Power source: AC 100-240V 50/60Hz
Power consumption: 8.5W
TV systems supported: PAL/NTSC/AUTO
Operating Temp. Range: +5 C to +35C
Continuous playing time: 120 minutes
Dimensions: 210(L) x 171(W) x 39.8(H) mm
Operating Humidity Range:10 % to 75 %
Battery of Remote Control: AAA1.5V x 2
Discs supported:
1. DVD-VIDEO disc
12 cm single-sided, single-layer
12 cm single-sided, dual-layer
12 cm double-sided, single-layer
8 cm single-sided, single-layer
8 cm single-sided, dual-layer
8 cm double-sided, single-layer 2. CD-DA/CD-R/CD-RW/MP3 -CD
12cm disc, 8cm disc
Audio signal output:
1.DVD (linear audio)
(1) Frequency response: 20Hz-20KHz
(48KHz sampling)&20Hz-20KHz (96KHz
sampling)
(2) S/N ratio: >45dB
(3) Dynamic range: 90dB
2.CD audio:
(1) Frequency response: 20Hz-20KHz
(2) S/N ratio: >45dB
(3) Dynamic range: 90dB
Specifications are subject to change without
notice