Lenco DVP-735 - Manual (Page 11)

11
PICTURE ROTATIONS
Press RIGHT and LEFT navigation buttons to rotate the picture Clockwise and anti-clockwise
respectively.
PICTURE FLIPS
Press UP NAVIGATION button to flip the picture vertically. Press DOWN NAVIGATION button to
flip the picture horizontally.
PICTURE ZOOM IN/OUT
Press ZOOM button continuously, the picture zooms in and out. If the picture is enlarged, you
may use the navigation buttons to view the other parts of the picture.
4.5. USB SD MMC operation
Make sure that the unit is turned on. Now insert a USB devise of insert a SD/MMC card with the
label side up. Wait a few seconds so that the player can recognize the devise. The player will now
display the root menu of the devise. If you are playing a disc; press and hold the STOP button for
several seconds until the media selection menu appears. Here you can select the desired mode.
5. Basic settings of the player (OSD Menu)
In this menu the preferred (default) settings can de set. To open / close the settings menu press
the SETUP button.
General setup
TV Display
This function must match with your TV set.
LCD Mode Select aspect ratio 4:3 or 16:9.
OSD Language Select the language of the OSD menu.
Screen saver
Set the screen saver function ON or OFF
Exit setup Select this to exit the setup menu
Video setup
Brightness set the brightness of the display.
Contrast set the contrast effect of the display.
Hue set the hue of the display.
Saturation set the saturation of the display.
Exit setup select this to exit the setup menu
System setup
TV type
This function must match with your TV set.
Audio Select the default audio language when playing a DVD
Note: not every disc supports this function
Subtitle Select the default subtitle language when playing a DVD
Note: not every disc supports this function
Disc menu Select the default disc menu language when playing a DVD
Note: not every disc supports this function
Parental Set the parental lock level
Note: not every disc supports this function
Password Select this option to change the password.
The supervisor password is 1389
Default Reset all settings back to factory settings
Exit setup select this to exit the setup menu