Lenco DVL-1955 - Manual (Page 25)

23
Recording Operation
Recording
Press REC button on the remote control to start recording in DTV mode, and the TV will give you a hint.
Select “OK” item, and press OK to start recording, there will be a sign on the screen.
Note:
a. Please make sure the USB device is on the TV.
b. Please mke sure the speed and free space of the USB is enough.
c. Press STOP button to exit the recording mode.
d. Press Recording list button to display the Recorder list, and you can play the program you selected.
e. You could also play the Recorded program in Multimedia mode.
Timeshift
Press button on the remote control to start timeshift in DTV mode, and the TV will give you
a hint. Select “OK” item, and press OK to start timeshift, there will be a sign on the screen, and the
screen will be freezed.
Note:
a. Please make sure the USB device is on the TV.
b. Please make sure the speed and free space of the USB is enough.
c. Press STOP button to exit the timeshift mode.
d. Press PLAY button to play the program you are recording from the beginning, and the timeshift will be
going on.
e. Timeshift time menu on the right top corner shows the fallen time between the current picture and the
living broadcasting picture;
f. During the recoding progress, if the signal is missing, the recording process will take a pause until the
signal is stable again.