Lenco DR-05-BT - Manual (Page 10)

Enter DAB mode
Press SOURCE button to switch to DAB mode. The unit starts scanning when turning on
DAB mode, the screen displays a slide bar indicating the progress of scanning, and the
amount of the stations it found. Once finished scanning, the unit plays the first station.
Select stations
1.
skip to next or previous stations.
2. Press ENTER or on remote control to activate the station.
Rotate the TUNER KNOB or press or on RC t o
Station Scan
Press and hold the MENU/INFO button on the front panel or press MENU button on the
remote control to enter the setting menu, rotate the TUNER KNOB or press / on
remote control to select or , press ENTER to confirm.
1. If you choose , it’ll start scanning and search all DAB channels.
2. If you choose , press the ENTER to cycle through all the channels,
which are numbered from 5A to 13F.
3. Briefly press ENTER can activate the selected stations.
Store station presets
It is possible to store up to 20 of your favorite stations. This will enable you to access your
favorite stations quickly & easily.
1. To store a preset, you must first be listening to the station that you would like to save.
2. Long press PRESET button until the screen displays:
3. Rotate the TUNER KNOB or press or on remote control to
select the number you want to store.
4. To confirm preset, press ENTER on the front panel or on remote control, the screen
displays: .
Note: If any stations have been preset before, the screen will show the station name,
e.g..
5. Press the PRESET button to recall a preset, the screen displays:
Preset Recall
<1: (Empty)>
Preset Store
<1: (Empty)>
Example:
If you are listening to BBC World which you want to preset in NO.5 station.
a) Tune to the station BBC World you want to store as preset.
b) Long press the PRESET button until the appears.
c) Rotate the TUNER KNOB to select 5, press ENTER button, now .
DAB operation
9