Lenco DF-1200 - Manual (Page 6)

6
1.2 Touch Buttons and Right Side of Frame
1.POWER 9.ON/OFF
2.MENU 10.DC IN
3.UP 11.EARPHONE
4.DOWN
12. MINI USB
5.PLAY/PAUSE 13.USB
6.LEFT 14. SD/MMC/MS/XD
7.RIGHT 15. CF
8.RETURN
2. Installing & Replacing the Battery
Place the upside of the remote control down, press down on the ridged area of
the battery cover and pull towards you to remove the tray. Place one CR2025
lithium button-cell battery on the tray with the positive“+”side facing you.
Reinsert the tray.
3. Getting Started
3.1 Extend the digital photo frame bracket on the back of the frame to the
widest position for greatest stability, and then plug one end of the
included AC adapter into a standard 110-240V AC electrical outlet and the
other end into the right side the frame.
Note: There are different positions for the digital photo frame stand. Please
refer to "Stand Instruction".
3.2. Remove the protective film covering the LCD.
3.3. Remove the plastic battery insulator from the battery compartment and
make sure the remote control has a battery inside. Please refer to