beautypg.com

Connecting to a pc, Specifications, System requirement – Lenco DC-1041 User Manual

Page 2: Troubleshooting

background image

2. Open the battery door (please make sure the battery door was unlocked before open).
3. Insert the MicroSD card into the camera.

Note:
1. There is only one right direction to insert the MicroSD memory card into the slot. Do not force

the card into the memory card slot, since it may damage both the camera and the MicroSD
memory card.

2. The MicroSD memory card must be formatted before taking photographs. See the following

sections for more information.

5.3 Formatting the memory or MicroSD card

1. Press the Menu button ( ) in PHOTO or VIDEO mode.
2. Select the setup mode by pressing the Right button.
3. Select the format icon by pressing the

W

( ) button and press the Shutter button to

confirm.

4. Press the Shutter button to format the SD memory card.

5.4 Setting the resolution

The camera can be set to different resolutions.
1. Press the Menu button ( ) in PHOTO mode, select the resolutions icon by the

W

(

) key

and press the Shutter to confirm.
Resolutions: VGA (640 x 480), 3M (2048 x 1536),

5M(2592x1944); 8M(3264x2448);

16M (4608x3456)

2. Five different resolutions will be displayed. Select the desired resolution by using the Up or

Down button and press the Shutter button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera.
2. Depending on the distance to the object being photographed, use macro switch to adjust

the distance. Select the flower symbol ( ) if you wish to take a close-up photograph

(11cm

–18 cm).

If you wish to take a video or a photograph of surroundings or people (0.5m

– infinity), set the

macro switch to normal mode ( ).

3. If you are not sure if there is enough lighting, turn on the automatic flash( ) by pressing the

Flash button. (If the battery power is too low, the flash won

’t be activated).

4. Use the LCD screen to aim at the object you wish to take photographs of.
5. Press the Shutter button and wait until the LCD display turns on again.
Caution: 1) Taking pictures for fast-moving object is not recommended.

2) Image may be distorted when taking pictures in a moving vehicle.

5.6 Zoom in and out

The camera can zoom in up to 4 times.
Zoom in or out by pressing the Up or Down button, a number will appear on the display,

4.x is the

maximum zoom ratio.

5.7 Self-photographying using the small monitor

If you want to take a photo of yourself, you can simply use the small monitor LCD screen. Follow
the steps below:
1. Press the LCD switch button to switch to the small monitor.
2. Use the small monitor as a viewfinder to aim at yourself.
3. Press the Shutter button to take the photo of yourself.

5.7 Self-timer setting

You can also use the self-timer function when you take a photograph of yourself or when you take
a photograph without flash of an object. To avoid shaking of the camera a tripod is recommended.
1. Set the camera to photo mode.
2. Press the Menu button ( ). The menu will appear.

3. Press the

W

( ) button to select Self Timer and confirm by pressing the SHUTTER button.

4. Press the

W

( ) button to select the

“On” option

5. Press the Shutter button to confirm. The self-timer function is now ready for use.
6. Aim at the object you wish to take photos of.
7. Press the Shutter button to take a photograph.
8.

The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will

beep during the delay time.

5.8 Recording video clips

1. Press the Mode button to select the video clip mode ( ).
2. For setting the resolution, Press the Menu ( ) button and select Resolution, then press the

Shutter button to confirm. Two resolutions will be displayed.

VGA (640 x 480), QVGA ( 320 x 240).

3. Press the Shutter button to start recording videos, press the right button to pause and

press

the Shutter button again to stop recording. The video clip will now be saved as an AVI file in
the camera memory.

5.9 Playback photographs

The camera provides two options for playback: a) Single b) Thumbnail
1. Press the Playback ( ) button to get into Playback mode.
2. The last picture or video clip taken will be displayed. Press the W( ) to get into the

thumbnail mode. Press the Left /Right /Up /Down button to select the desired picture, and
press the Shutter button to view.

3. In full screen display, press the

T

(

)

button to zoom in the photo.

4. To shift the image in zoom-in mode, press the Shutter button and then use the

Mode/Menu/Left/Right buttons.

5. Press the Menu ( ) button in Playback mode, press again and hold the Menu button until

the menu options displayed. Select SLIDE SHOW and set up the desired slide show way.
Press the Shutter button to confirm. The pictures saved in the MicroSD card will be displayed
in sequence automatically. To stop slide show, press the Menu button.

6. Press the Menu ( ) button in Playback mode, press again and hold the menu button until

the menu options displayed. Select Photo Effect and press the SHUTTER button. Select the
desired effect by pressing the up/down button and press the shutter button to confirm. The
image will be saved as a separate image.

5.10 Protecting photographs/videos

You can prevent the photographs/videos in the MicroSD card from accidental erasure.
Follow the instructions below to protect photographs/videos.
1. Press the Playback ( ) button to get into Photo playback mode.
2. Press the Left or Right button to select the photograph/video clip to be protected.
3. Press the Menu ( ) button in Playback mode, press it again and hold the Menu button until

the menu options displayed. Select Protect and press the Shutter button

4. Select

“Protect single” or “All” and press the Shutter button to confirm.

5.11 Resizing photographs

A captured image can be resized to a smaller size and saved as a separate image.
Follow the instructions below to resize photographs.
1. Press the Playback ( ) button to get into Photo playback mode.
2. Press the Left or Right button to select the photograph/video clip to be resized.
3. Press the Menu ( ) button in Playback mode, press it again and hold the Menu button until

the menu options displayed. Select Resize and press the Shutter button

4. Select the new size and press the Shutter button to conform. The image will be saved as a

separate image.

5.12 Playback video clips

1.

When video clips are displayed, press the Up button to start playing the video and press the
Up button again to pause the playback.

2. Press the Right button to fast forward or press the Left button to rewind.
3. Press the Mode button to stop and exit .

5.13 Deleting photographs and video clips

You can delete a single photograph / video clip, or delete all the photographs / video clips in the
memory.
Follow the instructions below to delete photographs/videos.
1. Press the ( ) button to enter the playback mode.
2. Press the Left or Right button to select the photograph/video clip to be deleted.
3. Press the Menu/Delete button( )and select

“Delete This Image(Video)” or “All” .

4. Press the Shutter button to confirm.
5. Press the Menu button to exit.
NOTE: Select

“All” and Press the Shutter button to confirm, all the pictures and videos will be

deleted.

Photos that are protected from accidental erasure cannot be deleted. To delete photos,

set the protect setting for the set photos to unprotect mode (Section 5.10), and then follow the file delete procedure.

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files
for storage.

7. Specifications

Sensor

8.0 Mega pixels CMOS sensor

Image resolution

16.0 Mega pixels: (4608x3456)

8.0 Mega pixels: (3264x2448)
5.0 Mega pixels: (2592x1944)
3.0 Mega pixels: (2048x1536)
VGA: (640x480)

Lens

F/2.8 f = 4.8mm

Focus range

0.5m. ~ Infinity

Macro mode

11cm

– 18cm

Digital zoom

4x

Flash strobe

Built-in ( Auto / force / off )

LCD display

2.7+1.8" TFT color display

White balance

Auto / Daylight / Cloudy / Fluorescent / Tungsten

Video mode

30fps@VGA / 30fps@QVGA with MicroSD card

External memory card

Supports MicroSD cards up to 32GB

File format

Picture: JPEG, Video: AVI

Self timer

10 seconds

PC interface

USB 2.0

Power source

2 x AAA alkaline batteries

8. System requirement

Operating system

WinXP (SP3)、

Vista32/64 Win7 32/64 and Mac OS X 10.6.8

or above

CPU

Pentium III or above

RAM

At least 64MB

Interface

USB port

CD

4x speed CD ROM or above

9. Troubleshooting

Problem

Cause

Solution

Cannot turn on the
camera

Low battery power.
Battery placed at wrong
polarities.

Replace or install the battery
correctly.

Photos can not be saved
when taking pictures.

The memory card hasn’t

been formatted properly.

Format the memory in setup
mode of the camera. Please
refer to section 5.3.

Cannot find removable
disk after connecting the
camera to the computer

.

Connection failure.

Make sure all cable
connections are secured and
restart the computer if
necessary.

Flash does not work.

Battery power is too low.

Replace with new 2 x AAA
alkaline batteries

The batteries used up
very fast.

Incorrect or old, used up,
battery

Replace with new 2 x AAA
alkaline batteries

The photos are blurry

1. The camera is not held

steadily

2. The lens of camera is

dirty.

1. Hold the camera steadily

until it beeps when taking
video photo.

2. Clean the lens with soft dry

cloth.