Wires connection, Specification, Service and support – Lenco CS-410 User Manual
Page 5
4
WIRES CONNECTION
CONNECTOR A
1.
2.
3.
4. Memory +12V
5. Auto Antenna Output
6.
7. 12V (To Ignition Key)
8. GROUND
SPECIFICATION
GENERAL
Supply Voltage DC
12V Negative Ground
Current Consumption
Max.7A
Power Output
7Watts x 4 (at DC 14.4V)
Number of Channels
2 STEREO channels
Unit Dimensions
178(W)x108(D)x50(H)mm
FM SECTION
Frequency Range
87.5MHz-108MHz
Effective Sensitivity
3uV.
Signal to noise
50dB
AM SECTION
Frequency Range
522KHz-1620KHz
Effective Sensitivity
40dB.
Signal to noise
40dB
RCA LINE OUT
Output
1000mV@MAX.
MMC/SD or USB PLAYBACK
System
MP3 audio system
Frequency Characteristics 20Hz-20KHz
Signal to Noise(MMC/SD & USB) 55dB (1KHz)
Service and support
For information: www.lenco.com
For support: http://lencosupport.zendesk.com
Lenco helpdesk:
Germany
0900-1520530 (Local charges)
The Netherlands
0900-23553626
(Local charges + 1ct p/min)
Belgium
02-6200115
(Local charges)
France
03-81484280
(Local charges)
The helpdesk is accessible from Monday till Friday from 9 AM till 6 PM.
When contacting Lenco, you will always be asked for the model and serial number of your product. The serial number can
be found on the back of the device. Please write down the serial number below:
Model: CS-410
Serial number:_________________________________
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)