Lenco CS-410 - Manual (Page 4)

3
5. - MODE PTY BUTTON
Press the MODE to select RADIO/CARD(SD/MMCcard inserted)/USB(flash driver inserted)/AUX mode.
Press the button longer than 2 seconds to select the following mode: POP M- - NEWS while selecting PTY TYPE, its
selection
is implemented by present buttons as describe in present key,(press one of the 6 present buttons shortly and repeatedly to
select
the PTY TYPE in the present button)When POP M or NEWS is on, the previous PTY program and PTY word is displayed
on LCD. If there are no keys entered for 2 seconds, previously selected PTY is searched.
If desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY icon goes off.
6&7. - TUNE,SEEK, TRACK, SKIP UP/DOWNBUTTONS
A) Radio mode
Press the>>I or I<< to perform manual seek tuning. Press and hold the >>I or I<< to perform automatic tuning.
The unit will tune to the station with strong signal.
B) SD/MMC, and USB mode
Press the >>I or I<< to play the next or previous track.
8. - BAND & AP BUTTON
Press the BAND to select radio band as follow: Fm1 -> FM2 -> FM3 -> MW1 -> MW2
Press and hold this button to activate the auto storage function. The unit scans and preset the stations with strongest
signal.(18stations in FM , 12 stations in MW )
9. - CLOCK BUTTON
Press the CLK button briefly to display time for 5 seconds then press and hold the CLK button for more than 1sencond
until the real time flashes on the display and then you can adjust the time by the SEL button.
10-15. - PRESET STATIONS MEMORY AND >II, INT, RPT, RDM BUTTONS
A) Radio mode
Press the 1-6 buttons to select the preset stations.
Press and hold the 1-6 buttons to store the station that currently listening.
B) SD/MMC, and USB mode
Press the >II to pause or resume playing. Press the INT to play the first 10 seconds of the tracks.
Press again to off this function and the current track will keep playing.
Press the RPT once to repeat plays the current track.Press the RPT twice to repeat plays the current folder.
Press the RDM to turn random play on or off.
Press the 5/6 to move up or down 10 tracks at a time(Note: when the remaining tracks less than 10, this function is invalid)
During playback, press and hold the +10 to select the next folder to be play.
16.-AUX JACK
Press the MODE to select auxiliary input playing mode when connecting with external audiodevice.
17.-SD/MMC CARD SLOT
When SD/MMC card is inserted,the unit is automatically switched to SD/MMC mode.(Note:if both USB storage device
and SD/MMC card inserted,the system will switch to the mode of the latest connected.)
18.-USB PORT
When USB storage device is connected, the unit is automatically switched to USB mode.
INSTALLATION METHOD