Nap s1 power amplifiers, 1 nap s1 audio inputs and connections, 3 . 0 n a p s 1 p o w e r a m p l i f i e r s – Naim Audio NAP S1 User Manual
Page 10
3 . 1
N A P S 1 A U D I O I N P U T S A N D C O N N E C T I O N S
Each NAP S1 power amplifier incorporates a single balanced XLR audio input socket on its
connection panel. This is illustrated in Diagram 3.2.
The balanced inputs can be connected to either balanced or unbalanced preamplifier outputs.
If unbalanced outputs are used, specialist unbalanced to balanced interconnect cables will be
required. Your Naim retailer will be able to supply appropriate cables.
If your NAP S1 power amplifiers are to be used with a NAC S1 preamplifier, the left and right
balanced XLR power amplifier input sockets should be connected to the left and right preamplifier
outputs using the XLR to XLR balanced interconnect cables supplied with the power amplifiers.
Your Naim retailer will be able to supply longer balanced interconnect cables if required.
Always use interconnect cables intended for high-end audio applications to connect to the
NAP S1 power amplifier inputs. Naim interconnect cables will always provide the best results.
3 . 0 N A P S 1 P O W E R A M P L I F I E R S
1 8
1 9