Narcom remote handset, 6 narcom 4 remote handset – Naim Audio NAT05 XS User Manual
Page 7
E5
NARCOM Remote Handset
6 NARCOM 4 Remote Handset
The NARCOM 4 remote handset is is a multi-functional remote control handset designed
to be used with Naim CD players, integrated amplifiers, preamplifiers, preset tuners and
subwoofers.
To fit batteries, remove the battery cover and insert the batteries into the body taking care
with their orientation. Replace the battery cover.
System Component keys
Numeric keys (soft)
CD Transport (global)
Volume and mute keys (global)
Left (
3
) and right (
4
) keys (soft)
Prog key and Mon key (soft)
Balance keys (global)
Scan and Mode keys (global)
Disp key (soft)
6.1 Using NARCOM 4 with the NAT05 XS
Operation of the NARCOM 4 handset is based around
three types of keys:
System Component Keys
,
Global Keys
and
Soft Keys
.
6.1.1 System Component Keys
System Component Keys
keys switch the operation of
the
Soft Keys
into modes appropriate to each system
component: CD player, tuner (tun) preamplifier, etc.
Global Keys
operate specific component functions
regardless of the
System Component Key
setting and are
available at all times.
6.1.2 Gobal Keys
Global Keys
operate as follows:
vol (
5
&
6
):
Adjusts the preamplifier volume and the
volume control position.
mute
:
Reduces the preamplifier volume to zero. A
second press restores the volume.
bal (
3
&
4
):
Adust channel balance on appropriately
equipped products.
CD Transport:
Control CD transport and track selection.
scan
:
Switches the tuner to scan mode and starts
a scan from the current frequency upwards.
When a station is found the scan will stop.
Pressing the
scan
key will resume the scan.
mode
:
Switches the tuner between
frequency
,
scan
and
preset
modes.
6.1.3 Soft Keys
In tuner mode the
Soft Keys
are used to store station
presets. Soft keys operate as follows:
The
prog
key enables specific FM station frequencies to be
assigned to preset memories. To assign a station to a preset
either tune manually by inputting the station frequency
directly from the
numeric
keypad or by using the
left
(
3
),
right
(
4
) or
scan
keys. Stations found by the tuner
scanning the FM band can also be saved as presets.
When a station is tuned press and hold the
prog
key. The
tuner is now in preset program mode: the preset indicator
will flash and the display will show
--
on the left hand side.
Enter the desired preset number from the numeric keypad
or by using the
left
(
3
) and
right
(
4
) keys. On its right
hand side the display will show
—
or
P
if the preset number
6.2 NARCOM 4 Keys
is already in use. If the preset number is already in use a
different preset number can be entered at this point. Exit
from program mode and save the new or overwritten
preset by pressing and holding the
prog
key. To exit from
preset program mode without saving (or overwriting) a
preset, select
0 0
on the numeric keypad.
To erase a preset number, select the preset and press and
hold the
disp
key.
The
disp
key can also be used to switch the tuner display
on and off. When the display is switched off it will illuminate
temporarily when a front panel button or handset key is
pressed.
Note:
The info and select keys are
unused.