Naim Audio NAT05 XS - Manual (Page 2)

Page Section
E1 1 Connections
E1 2 Mains Power
E2 3 General Installation
E3 4 NAT05 XS Installation
E4 5 NAT05 XS Operation
E5 6 NARCOM 4 Remote Handset
E6 7 NAT05 XS Connections
E6 8 NAT05 XS Specification
E6 9 Declaration of Conformity
Contents
SAFETY INSTRUCTIONS
In order to comply with current European safety regulations
it is essential that the Naim loudspeaker connectors
supplied with amplifiers and loudspeakers are used.
Do not under any circumstances allow anyone to modify
your Naim equipment without first checking with the
factory, your retailer, or your distributor. Unauthorised
modifications will invalidate your guarantee.
Equipment must not be exposed to dripping or splashing
and no objects filled with liquid, such as vases, should be
placed on the equipment.
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
For your own safety do not under any circumstances open
Naim equipment without first disconnecting it from the
mains.
Warning: an apparatus with CLASS I construction shall be
connected to a mains socket outlet with a protective
earthing connection.
Where the mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall remain
readily operable. To disconnect the equipment from the
mains remove the mains plug from the mains outlet.
The following label is attached to all mains powered
equipment:
w A R N I N G
THIS APPARATUS
MUST bE EARTHED
Products that display the crossed-out wheeled bin logo
cannot be disposed of as domestic waste. These products
must be disposed of at facilities capable of re-cycling them
and appropriately handling any waste byproducts. Contact
your local authority for details of the nearest such
facility. Appropriate recycling and waste disposal
helps conserve resources and protects the
environment from contamination.