Naim Audio NDX - Manual (Page 13)

11
4.2 The Language Menu
The Language setup menu
enables the NDX/5XS user
interface language to be
changed. Enter setup mode
and use the handset
ok/list key
to select Language . Use the
handset up ( 5 ) and down ( 6 ) and ok/list keys to select
a language. Exit setup mode by pressing the handset exit
key.
4.3 The Inputs Menu
The Inputs setup menu enables a variety of parameters
to be configured for each NDX/5XS internal and external
input. The options available for each are described in the
following sections. Two parameters are common to all
inputs:
Enabled: Switches the input on or off and displays or hides
any associated menus.
Name: Enables user specified names to be attached to
inputs. Use the handset to enter text.
4.3.1 iRadio Input
Parameter Options
Enabled: Yes / No
Name: User definable
Auto Disconnect: Select time.
Auto-disconnect
is provided so that internet provider
data usage limits are not inadvertently
exceeded by an NDX/5XS left connected
to internet radio.
Browse History: Yes / No. If Yes is specified NDX/5XS will
select the last used station if it is available.
If
No is specified NDX/5XS will display the
full list of available stations.
Setup
4 NDX/5XS Setup
Once NDX/5XS is installed with mains power and all external connections made, it can be
switched on and set up for use.
The degree to which you modify NDX/5XS default settings will depend upon the uses to
which you put it and the extent to which you use its capabilities. It may be that you have
no need to modify the default settings at all, however we would encourage you to read
this section of the manual in order that you gain a full understanding of NDX/5XS abilities.
The following paragraphs describe each NDX/5XS setup menu in turn starting with the
setup home menu.
Enter NDX/5XS setup mode by pressing the handset setup ( ) key. Navigate around the
setup menus using the handset arrow keys and make selections using the ok/list key. Exit
setup by pressing the exit key.
4.1 The Setup Home Menu
The NDX/5XS setup home menu
provides access to nine setup
menus. The function of each
menu is listed below:
Language: Enables
the user
interface language to be changed.
Inputs: Enables parameters for each internal
and external input to be configured.
Analogue Outputs: Enables analogue output socket
options to be selected.
Network Settings: Configures network connection
settings.
Digital Output: Enables digital output options to be
selected.
Front Display: Configures display features.
System Automation: Enables system automation to be
configured.
Handset Keys: Enables inputs to be assigned to
specific handset keys. Also enables
configuration of the handset
navigation (
3456 ) keys.
Factory Settings: Enables interrogation of NDX/5XS
status, monitoring of handset
commands, deletion of all user
presets, reset of system automation
and return to factory default settings.
Each of the nine setup menus is described in detail in the
following sections. Use the handset
up ( 5 ) and down ( 6 )
and ok/list keys to select a setup menu.
Setup 1/9
4 Language
Inputs
Analogue Outputs
Network Settings
iRadio 1/4
4 Enabled: Yes
Name: iRadio
Auto Disconnect: 4Hrs
Browse History:
No
Language 1/7
4 English
Français
Deutsch
Italiano