Naim Audio NDS - Manual (Page 14)

12
4.2 The Language Menu
The Language setup menu
enables the NDS user interface
language to be changed. Enter
setup mode and use the handset
ok/list key to select Language .
Use the handset up ( 5 ) and
down ( 6 ) and ok/list keys to select a language. Exit setup
mode by pressing the handset exit key.
4.3 The Inputs Menu
The Inputs setup menu enables a variety of parameters
to be configured for each NDS internal and external
input. The options available for each are described in the
following sections. Two parameters are common to all
inputs:
Enabled: Switches the input on or off and displays or hides
any associated menus.
Name: Enables user specified names to be attached to
inputs. Use the handset to enter text.
4.3.1 iRadio Input
Parameter Options
Enabled: Yes / No
Name: User definable
Auto Disconnect: Select time.
Auto-disconnect
is provided so that internet provider
data usage limits are not inadvertently
exceeded by an NDS left connected to
internet radio.
Browse History: Yes / No. If Yes is specified NDS will select
the last used station if it is available. If No
is specified NDS will display the full list of
available stations.
Setup
4 NDS Setup
Once NDS is installed with mains power and all external connections made, it can be
switched on and set up for use.
The degree to which you modify NDS default settings will depend upon the uses to which
you put it and the extent to which you use its capabilities. It may be that you have no
need to modify the default settings at all, however we would encourage you to read
this section of the manual in order that you gain a full understanding of NDS abilities. The
following paragraphs describe each NDS setup menu in turn starting with the setup home
menu.
Enter NDS setup mode by pressing the handset setup ( ) key. Navigate around the setup
menus using the handset arrow keys and make selections using the ok/list key. Exit setup
by pressing the exit key.
4.1 The Setup Home Menu
The NDS setup home menu
provides access to nine setup
menus. The function of each
menu is listed below:
Language: Enables
the user
interface language to be changed.
Inputs: Enables parameters for each internal
and external input to be configured.
Analogue Outputs: Enables analogue output socket
options to be selected.
Network Settings: Configures network connection
settings.
Digital Output: Enables digital output options to be
selected.
Front Display: Configures display features.
System Automation: Enables system automation to be
configured.
Handset Keys: Enables inputs to be assigned to
specific handset keys. Also enables
configuration of the handset
navigation (
3456 ) keys.
Factory Settings: Enables interrogation of NDS status,
monitoring of handset commands,
deletion of all user presets, reset of
system automation and return to
factory default settings.
Each of the nine setup menus is described in detail in the
following sections. Use the handset
up ( 5 ) and down ( 6 )
and ok/list keys to select a setup menu.
Setup 1/9
4 Language
Inputs
Analogue Outputs
Network Settings
iRadio 1/4
4 Enabled: Yes
Name: iRadio
Auto Disconnect: 4Hrs
Browse History:
No
Language 1/7
4 English
Français
Deutsch
Italiano